Arduino RTC DS1302 Real Time Clock Module

  • $0.87
  • Ex Tax: $0.87
  • Product Code: EPC_DBP_60F
  • Availability: In Stock
  • Product Details

  • Specifications:
  • Features:- 31 8 temporary data storage RAM- Serial I / O port pin makes the least number of ways- Wide range of operating voltage 2.0 5.5V- Current 2.0V, less than 300nA- Read / write clock or RAM data transmission when there are two single-byte transmit and multi-byte character sets transfer mode- 8-pin DIP package or optional 8-pin SOIC package assembly according to the surface- simple 3-wire interface- Vcc = 5V and TTL-compatible- Optional industrial temperature range -40 to +85- Dual power tube for the main power and backup power supply- IC Block below for easy replacement and plug the chip
  • Crystal 32.78KHz, matching capacitance pF
  • DS1302 made large 8-pin DIP chip, chip,
  • Voltage: 3V
  • Current: 20mAh
  • Genuine Spare Battery for The Celestial Sphere CR2032
  • Non-rechargeable batteries(battery is included)
  • Module Operating Voltage: 3.3V/5V
  • Operating Temperature: 0 - 70 Celsius
  • Crystal Size: 2 x mm / 0.1 x 0.2inch
  • PCB Single Panel Size: 42 x 24 x 12mm / 1.7 x 0.9 x 0.5inch
  • Hole diameter: 3.1mm / 0.1inch
  • Product Weight :4g / 0.1oz
  • Wiring (to provide the program, for example, can take any IO port, the port defined in the program can be modified):- VCC +5 V/3.3V- GND GND- CLK P02- DAT P01- RST P00- VCC and GND must not be reversed, or it will burn the chip- 51 MCU P0 port requires a pull-up, if your single-chip pull-up resistor is not connected, you can port the data cable to the other
  • Package Weight : 5 G / 0.18 Ounces

  • Package Include:
  • 1 x RTC DS1302 Real Time Clock Module for Arduino AVR ARM PIC SMD than DS1307

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good